AL – CLEANING FURNACE WALLS
Very important the proper maintenance of melting furnace walls.
Dross formation and adhesion to furnace walls strongly limits thermal Exchange, reduces furnace capacity and is responsible for inclusions in metal and casts.
FOUNDRY SCOR Powder fluxes to clean properly furnace walls. Can be used manually or by FLUX INJECTOR.
ROCK FLUX flux in small bricks to float on the molten metal surface.
AL – COVERING-DROSSING-DEOXIDIZING FLUXES FOR ALUMINIUM AND ITS ALLOYS AL MG<1%, AL SI 7-13%
Molten Aluminium alloys are subject to oxidation, therefore metal has to be protected during melting cycle by proper fluxes, to avoid hydrogen absorption from ambient atmosphere.
During the process, using proper fluxes, mixed with molten metal, allow to eliminate oxides inside molten metal, to improve metallurgical properties.
Drossing fluxes allow to eliminate oxides and dross, created during melting and previous treatments.
Metallurgical treatment improves mechanical properties of the alloy, allow for inclusion free casts, reduces metal inside dross, avoid oxidation during holding time.
FOUNDRY SCOR Powder fluxes for covering, drossing, deoxidizing treatments.
ECOSAL granulated fluxes series covering, drossing, deoxidizing treatments. Can be used manually or by LAMPI FLUX INJECTOR.
FOUNDRY SX-DX-DEOX cans (patented system). Aluminium cans series, containing covering, drossing and deoxidizing fluxes. Added manually or via MDCD/ADCD degassing unit.
ROCK FLUX in small bricks for covering, drossing and deoxidizing treatments. Specifically used for melting of scraps and foundry internal recycling and turning aluminium.
AL – COVERING-DROSSING-DEOXIDIZING FLUXES FOR ALUMINIUM AND ITS ALLOYS AL MG>1%, AL SI >13%, AL SI TREATED WITH SR
Molten Aluminium alloys are subject to oxidation, therefore metal has to be protected during melting cycle by proper fluxes, to avoid hydrogen absorption from ambient atmosphere.
During the process, using proper fluxes, mixed with molten metal, allow to eliminate oxides inside molten metal, to improve metallurgical properties.
Drossing fluxes allow to eliminate oxides and dross, created during melting and previous treatments.
Metallurgical treatment improves mechanical properties of the alloy, allow for inclusion free casts, reduces metal inside dross, avoid oxidation during holding time.
FOUNDRY SCOR Powder fluxes for covering, drossing, deoxidizing treatments.
ECOSAL granulated fluxes series. Covering, drossing, deoxidizing treatments. Can be used manually or by LAMPI FLUX INJECTOR.
FOUNDRY SX-DX-DEOX cans (patented system). Aluminium cans series, containing covering, drossing and deoxidizing fluxes. Added manually or via MDCD/ADCD degassing unit.
ROCK FLUX in small bricks for covering, drossing and deoxidizing treatments. Specifically used for melting of scraps and foundry internal recycling and turning aluminium.
AL – DEGASSING AND DEOXIDIZING FLUXES FOR ALUMINIUM AND ITS ALLOYS
Molten Aluminium alloys are subject to oxidation and hydrogen absorption during melting process.
Proper use of fluxes during process, mixed with molten metal, allow to get rid of gasses inside molten metal.
Proper degassing treatment allows to obtain alloy and casts free from pinholes and porosity.
FOUNDRY DEG tablets. Products to remove gas and oxides from the alloy. Tablets can be immersed in molten metal manually via proper hollow tool or self sinking.
FOUNDRY DX cans series(patented system). Aluminium cans containing degassing and deoxidizing flux. Added manually or via MDCD / ADCD degassing units.
AL – GRAIN REFINING FLUXES FOR ALUMINIUM AND ITS ALLOYS
High quality grain refining fluxes for Aluminium and alloys, including Mg>1% alloys. Refining action of Ti and B elements allows to obtain a finer cooling structure, improving mechanical properties of the alloy.
Can be used to treat sand, gravity or low pressure casting alloys.
Proper refining treatment allows to improve mechanical properties, elongation and resistance of the alloy, together with self feeding of the cast and surface finishing.
FOUNDRY AFF tablets series
Ti-B, B, P based products. Tablets can be added to molten metal manually via proper hollow tool or can be self sinking.
ECOSAL granulated fluxes series
Ti-B based products. Added manually or via LAMPI flux injector.
FOUNDRY AX cans series (patented system).
Aluminium cans containing Ti-B, B, P based fluxes. Added manually or via MDCD / ADCD degassing units.
MASTER ALLOYS AL Ti-B 5:1 – 3:1, P
Ti-B-P master alloys.
Rod, sticks or waffles.
AL – MODIFYING FLUXES AND PRODUCT RELEASING NA, AL-SI 7-12%
Modifying treatment is the last to perform on the alloys before casting. Structural modification of Silicon allows to improve mechanical properties of the alloys, including tensile strength and elongation, enhancing flow characteristics.
Modifying treatment reduces scrapping of casts due to cracks and porosity.
FOUNDRY MOD powder series
Powder fluxes to modify Al Si alloys, 7-12 % Silicon. Added manually.
FOUNDRY MOD/T tablets series
Tablets to modify Al Si alloys 7-12 % Silicon. Tablets can be added to molten metal manually via proper hollow tool.
ECOSAL granulated fluxes series
Granulated fluxes to modify AlSi alloys 7-12 % Silicon. Added manually or via LAMPI flux injector
FOUNDRY NA cans
Metallic Sodium in cans: 12,5 – 25 – 50 – 75 – 100 – 125 – 150 – 500 g
FOUNDRY MX cans series (patented system).
Aluminium cans containing fluxes and modifying elements Sodium based for AlSi alloys 7-12 % Silicon. High recovery. Added manually or via MDCD / ADCD degassing units.
MASTER ALLOYS Al Sr
Modifying master alloy, Sr based for Al-Si series, 7 to 12% Si
Al Sr 3,5% – 15% sticks, waffles and shots
AL – SPECIAL PRODUCTS TO ELIMINATE DETRIMENTAL ELEMENTS
Aluminium alloys contain some detrimental elements depending on the application such as Sodium, Calcium, Lithium, Magnesium, Strontium or Titanium.
Elimination of these elements is required when excess content causes structural modification or exceeds norms specification for the alloy.
FOUNDRY EL
Powder fluxes to eliminate Na, Ca, Li, Mg, Sr, Sb, Ti.
ECOSAL granulated fluxes series
Granulated fluxes to eliminate Na, Ca, Li, Mg, Sr, Sb, Ti.
Added manually or via LAMPI flux injector.
FOUNDRY ELX cans (patented system).
Treatment with cans is recommended up to 1000 kg of metal.
Aluminium cans containing fluxes to eliminate Na, Ca, Li, Mg, Sr, Sb, Ti.
Added manually or via MDCD / ADCD degassing units.
AL- MASTER ALLOYS AND TABLETS
During the melting process of Aluminium and its alloys there is the need to adjust some elements content percentage.
Addition of these elements is required to keep the alloy structure or to achieve norms parameters.
MASTER ALLOY Al Sr
Modifying master alloy Sr based for Al Si , 7 – 12% Si.
Al Sr 3,5% -15%Sr in sticks, waffles, shots.
MASTER ALLOY AL Ti-B 5:1 – 3:1, P
Refining master alloys in sticks, rod or waffles
MAGNESIO
In ingots or shots 100, 300, 500 g
FOUNDRY ALL
Tablets for the addition of metallic elements to the aluminium alloys, with or without flux content.
Available elements are:
Cr – Cu – Fe – Ni – Mn – Ti – Si – Zr
FOUNDRY ALX CANS (patented system).
The treatment with cans is recommended up to 1000 kg of metal.
